Autowatch Ghost 2 Immobiliser Cost
Ghost 2 is an innovative technology that prevents vehicle theft on two levels. It stops thieves from gaining access to your car and stops copying or cloning of keys that are already in use. It communicates with the ECU via buttons on your dashboard or steering wheel.
It is not detectable, and equipment for diagnosing it cannot detect it. It also requires an unique PIN code that only the owner knows.
Cost
It is not only frustrating and apprehensive to have your car stolen, but it can also be costly to repair or replace your vehicle. It is crucial to invest in a system that will protect your vehicle from theft. A Ghost immobiliser is one option. It works by preventing the vehicle from starting until a specific sequence of buttons are hit. This is similar to how you enter a password on a mobile phone.
This device is a subtle way to safeguard your vehicle against contactless theft and also aid in reducing the cost of your car insurance. Many insurance companies will offer lower rates on car insurance because they recognize that these devices are effective in deterring thieves.
The Autowatch Ghost ll is a discrete immobiliser that is installed in your vehicle without causing any damage. It does not require any additional components and operates by using buttons in the factory to generate an unique PIN code. The Autowatch Ghost-II is a more advanced version of the original Autowatch Ghost that is designed to protect against key cloning, hacking and vehicle swipes.
It is possible for a Ghost immobiliser to be bypassed, but it would require sophisticated equipment and knowledge of how to operate it. It is also difficult for thieves to understand the sequence of buttons required to use the device, so you and others are able to use it.
Autowatch Ghost ADR is another option that can be installed and programmed by Just Jeeps' certified installers. This unique immobiliser doesn't work with the standard CAN bus protocol and does not communicate with your engine control unit (ECU). This means that it can't be tampered and can only be launched when the ADR App is enabled and within the limits of the vehicle.
The Autowatch Ghost ADR is compatible with your smartphone, providing you with a complete security solution. It makes use of the GPS on your smartphone to determine your location, and can notify you if your vehicle is moved or even turned off, when parked in public areas. It can also be used to locate the stolen vehicle and then send a message through your phone to the thieves that the car was reported.
Benefits
A ghost immobiliser is an effective way to prevent your vehicle from being stolen. It stops your car from beginning without a PIN code. It is inaccessible to modern thieves using diagnostic tools as it doesn't block radio signals, which makes it a highly secure form of protection. It is a great way to deter key hacking or cloning. This makes it harder for thieves to steal your vehicle. It is a great option for people who have invested lots of time and money into the customization or maintenance of their vehicles.
Ghost is concealed inside your vehicle, making it impossible for thieves and others to spot. It uses existing buttons on the doors, steering wheels, or centre consoles to create a unique and reversible PIN code that must be entered in order for the vehicle to start. You can even choose to make the sequence up to 20 presses long.
This technology is extremely easy to use and doesn't require any additional hardware to work, it is able to work by integrating with the CAN data bus that is in your vehicle. It is undetectable by thieves using diagnostic tools, because there are no missing signals and it operates completely silent when in operation. It is not affected by the use of jamming or spoofing devices because it does not transmit any information to the original key remote fob.
The Autowatch Ghost 2 offers a high-end device for protecting your car from key theft, key cloning, and hacking. It's a great deterrent for thieves and can be deactivated by using a mobile app on your smartphone or a Bluetooth Tag that connects to the Ghost 2. It's easy to set up and comes with a detailed instruction manual along with an emergency card and two Autowatch window stickers.
Ghost 2 is the newest generation of CAN bus immobiliser technology. It provides extreme security, with no need for unsightly wires and additional key fobs. It is undetectable, and generates a unique number of codes using your existing buttons. This code must be entered to start the vehicle. The system can also monitor your vehicle for any damage or vibrations and can send an emergency PIN override code to the owner's mobile phone in the event that it has been altered with. It also works with a variety of GPS tracking systems and can be used with a variety of apps for added convenience.
Installation
Autowatch Ghost 2 immobilisers are designed to stop recent car thefts using owner keys. They stop theft in two different ways. It stops your vehicle from being copied & also stops your car from being driven or even started in the event that the security pin hasn't been entered. This system isn't like traditional car alarms or key fob remotes that could be removed from the vehicle. It is directly integrated into the CANbus of the vehicle. This means it is undetectable & will not interfere with existing technology in your vehicles.
This is the only aftermarket CAN Bus immobiliser which does not require a separate control or a part replacement in your vehicle. Instead, it makes use of the buttons already present within your vehicle (such as those on the steering wheel doors, door panels or the center console) to create a unique changeable pin code sequence up to 20 presses. This unique PIN is required before the engine can start. The system is completely silent and there aren't any LED indicators to show that it is in your vehicle. The device doesn't transmit radio waves as a standard alarm, and is therefore not detectable by modern thieves who use diagnostics.
The Autowatch Ghost immobiliser communicates with the vehicle's ECU on the CAN data circuit. This is wireless, which means no wires or components are required. It is also completely inaccessible to anyone who doesn't have access to the CANbus system of your vehicle. This also means that it won't interfere with the operation of your vehicle in any way, either as a standard system or as an aftermarket device.
The Autowatch Ghost, measuring only 1.3cm long, is installed by our technicians during the service process or during valeting. It is fully insured by TASSA, and it will not be affected if professional thieves employ techniques like RF scans, spoofing, or code grabbing, since it doesn't rely on radio frequencies. This makes it the most advanced and cost-effective security option available today.
Removal
The Ghost Immobiliser stops thieves from starting your vehicle. It operates by sending pin codes through buttons that are already in your car. This makes it inaccessible to anyone who steps into your car and makes it an effective deterrent to criminals who steal cars. It also incorporates the feature of a silent engine lock, which blocks your vehicle from being driven. It can't be snuffed out by criminals using diagnostic tools to copy keys or hack the system.
The system also stops signal jamming and device spoofing -- all methods that thieves often use to get around standard immobilisers. This makes it much more difficult for thieves to steal your car, and could even save you money on your insurance premiums.
Ghost is the original CAN bus immobiliser aftermarket. It protects your car from key cloning and hacking. It uses buttons in your vehicle, such as those on the door panels or steering wheel to create a unique variable PIN code. The sequence can be up 20 numbers. The sequence must be entered before you can drive your vehicle. It also comes with the option of a service mode that allows you to temporarily start and drive your car without needing the PIN code.
If you've spent an enormous amount of time and money the design and style of your car or an expensive or rare vehicle, you should invest in this technology to ensure it's safe. The Ghost immobiliser is a non-visible, tamperproof security device that's impossible to get rid of by the average car thief. ghost immobilisers leaves no trace after installation, so the appearance of your vehicle will not be impacted.
The Autowatch Ghost is a secure immobiliser that connects to the vehicle's ECU and communicates with it via the CAN Data circuit. The system is completely silent, so thieves aren't able to hack into it to get around it like they have been doing in recent times using other systems, such as the OBD port hacks. Also, it is not detectable by any diagnostic equipment that a thief may own since it does not send out any radio signals.